Compressed air filtration is an elementary component for compressed air treatment and is present more than once in the treatment chain. Compressed air filters remove all types of solid and liquid contaminants from the compressed air in stages, i.e. large amounts of condensate and coarse contamination particles such as rust, abrasion particles, oil droplets and dust are filtered in the first stages and then fine oil mist and fine dust particles are filtered in subsequent stages. Compressed air filters containing activated carbon also remove foul-smelling odours and oil vapour. Specific compressed air filters even remove viruses and germs and thus produce sterile compressed air.
When developing our filtration products we pay highest attention to the implementation of the following customer benefits, even under the harshest and toughest conditions in an industrial environment.
• Maximum operational reliability
• Minimum total operating costs
- High separation efficiency at low differential pressures
- Long service life of the filter element
• Rugged design and long lifetime
• Easy maintenance
FCA series
Compressed air filters with cast aluminum housings
• Maximum volume flow 30 m³/h – 4,080 m³/h
• Maximum operating pressure 16 bar - 50 bar
• Connection G ¼ - G 3
FCA Filter Housing - FCA standard filter up to 16(50)bar in casted aluminium housing
FCA-WS - FCA-W standard water separator up to 16(50)bar in casted aluminium housing
FCA-CKL water separators (aluminum) with threaded connections up to 16 bar for volume flows up to 2,850 m³/h
Datasheet
FCA-AS FWS-MS water separators (aluminum, steel) with threaded/flanged connections up to 16 bar for volume flows up to 38,400 m³/h.
FWS series
Compressed air filters with welded vessel design, made from carbon steel or stainless steel
• Maximum volume flow 1.500 m³/h – 30,000 m³/h
• Maximum operating pressure 16 bar - 50 bar
• Connection DN 80 – DN 200
(higher volume flows, operating pressures or larger connection sizes on request)
FWS Filter Housing - FWS standard filter up to 16 bar in welded steel housing
Datasheet
FWS-W - standard water separator up to 16 bar in welded steel housing
FMA / FMS series
High pressure compressed air filters with aluminum, carbon steel or stainless steel housings• Maximum volume flow 380 m³/h – 4,290 m³/h• Maximum operating pressure 100 bar - 350 bar• Connection G ½ - G 1½
FMA/FMS filter up 350bar in machined aluminium- or steel housing
FWP series
Stainless steel process filtration
• Maximum volume flow 30 m³/h – 2,500 m³/h
• Maximum operating pressure 16 bar
• Connection G ¼ - G 3
(higher volume flows, operating pressures or larger connection sizes on request)
FWP Filter Housing - FWP prozess filters up to 16bar in stainless steel housing
FWPV vent filters in stainless steel housing
FWPV series
Stainless steel vent filters for process applications
• Maximum volume flow 20 m³/h – 200 m³/h
• Maximum operating pressure 0,5 bar
• Connection G ½ - G 3
All filter housings are made from high grade materials and offer a double surface protection ensuring a long lifetime. The housings are designed for energy efficient operation and offer extended port sizes relative to flow and pressure. A complete set of accessories is available, as well as several mounting possibilities for easy installation.
All filter housings are covered by the FST '1-person-easy-maintenance-concept', which means a single service engineer is able to carry out a full service even on the largest filter without the need of special tools or additional help.
Filter elements
Filter elements are available in a variety of filtration grades:
Grade W – Water separator
Removal of large amounts of liquids (condensate)
• Efficiency 99,9% (droplets >100µ) |
|
|
Grade V – Coarse filter
Removal of large amounts of solid or liquid, coarse contaminants
• Efficiency 99,99% (3µ) |
|
|
Grade ZN – General purpose filter
Removal of medium amounts of solid or liquid, fine contaminants
• Efficiency 99,9999% (1µ)
• Residual oil content ≤ 0,5 mg/m³ (liquid oil) |
|
|
Grade XN – Fine filter
Removal of small amounts of solid or liquid, finest contaminants
• Efficiency 99,9999% (0,01µ)
• Residual oil content ≤ 0,01 mg/m³ (liquid oil) |
|
|
Grade XXN – Super fine filter
Removal of small amounts of solid or liquid, finest contaminants
• Efficiency 99,99999% (0,01µ)
• Residual oil content ≤ 0,001 mg/m³ (liquid oil) |
|
|
Grade A / CA – Activated carbon element / cartridge
Removal of small amounts of gaseous contaminants, especially oil vapour
• Residual oil content ≤ 0,003 mg/m³ (oil vapour) |
|
|
Grade ST / STPL / SMPL – Sterile filter
Removal of living microorganism with the option for sterilizing
• Retention rate 0,01µ |
|
|
Grade D – Steam filter
Removal of coarse or fine, solid contaminants from steam flows
• Retention rate 25µ or 1µ |
|
|
??????? ???????? ?????? ?????
????? ??????
03-6764586
|
